Installation
ppTARGET™ is both simple to install as well as remove. It is made of a durable vinyl material that can withstand frequent flushings. It is best to avoid harsh chemicals and cleansers when sanitizing the toilet/urinal.ppTARGET™ must be installed on a clean, dry surface in order for it to properly adhere to the porcelain. Determine the desired location of the ppTARGET™. It may be necessary to remove some of the water from the toilet to obtain the exact location for the product. Once the surface is clean and completely dry, slowly remove the grid printed paper. ppTARGET™ will be attached to the white paper backing. Carefully separate the top portion of the ppTARGET™ from the paper and place the target on the surface of the toilet/urinal. Using a blunt device, such as a putty knife, press the target firmly to the desired location. Remove all wrinkles and air bubbles by gently tracing the target with hand or putty knife. It is best to give the target several hours to completely adhere to the surface before introducing water to the product.